Remove the retaining clip or nut.
Two handle cartridge faucet repair. Its purpose is to reinforce the cartridge shaft when the faucet body's setscrew is tightened against it. Rp64760 stem unit assembly, seat & spring, bonnet nut & washer this rp contains a set of 2. Depending on the supplier code of your faucet, your bonnet nut may have different.
Some handles have setscrews on the side or rear. Most are held on by retaining screws under the caps on the top of the handles. The cartridge is designed to be easily replaced.
Before starting any repair work, make sure to turn off the water supply. Both fixes are covered in these. Our handles were held on with small.
Examine the faucet handle to determine how it is installed. Others have a decorative cap. Insert the new or repaired cartridge into the faucet body, oriented as it was originally.
They cost $8 to $15 for most. Forthwith, turn on the spigot to. Instructions step 1 unscrew the set screw to remove the handle.
_________________________ 00:00 intro 00:25 what you'll need 01:04 step 1: Single lever handle (side) faucet removing the. Shut off the water to the sink.