If it is bent to the left you need to tighten the spoke from the opposite side to fix it.

Truing a bent bicycle rim. Getting the repair from the seller of the wheel : Check your bike’s spokes and rim. Usually, a bike shop can fix your.

Bicycle wheels come under a lot of strain. Place your hand on the bent bike wheel being observed and turn the wheel. Spin the rim and watch it from the side, noting any high spots using calipers or your fingers.

If the damage is severe, take out the tire to only work on the bent rim. Check the rim and spokes. They are designed to maintain tension and carry a heavy load, but sometimes they can buckle and become bent.

If the area out of alignment covers more than 4. The bicycle wheel is a hoop, or rim, with a set of spokes that connect it to a hub.spokes pull the rim from both the right and left side. Using your spoke wrench or pliers, tighten the spokes on one side of the wheel while loosening the spokes on the opposite side of the wheel.

Some basic tips and demonstration for truing or straightening a very bent wheel. Inspect your rim again for cracks around the bend just to be sure. Spin the bicycle to identify the bend.

Look at your wheel again, hold it with your hand or put it parallel to a flat surface and see if it’s already looking like a straight horizontal line. Wheel truing is the process of using a. After checking the rim and spokes, also check the wheel’s alignment.