All speeds are GPS and the engine trimmed for best speedrpm which seems to be a little less that 13 up.

Tritoon engine height. 3500 rpm 19 mph. Beginning boaters should be aware of the boats measurements. A long shaft engine requires a height of 20 and extra-long shaft engines will need a transom height of 25.

2021 Sylvan Mirage X3 CLZ. The standard height the paddle wheel effect will completely dominate any other steering torque cause Figure 7-17. I see 5800 RPM 45 MPH with a 185 Pitch Suzuki prop.

Trim your engines in and take it up to full WOT and start trimming up 4. To find out if your existing outboard is set at the best possible height start with the engine in idle and trim the outboard out one-half to nearly full trim Corbisier explains. Turns out some boat builders are letting transom height get closer to 21 inches or 26 inches.

The boat has a 200 HP Suzuki engine. I was able to take it out for a spin earlier today and had some issues. Industry standards dictate that for short shaft engines the transom height should be 15.

3000 rpm 15 mph. 4000 rpm 23 mph. Keep trimming up SLOWLY a bit at a time letting the boat catch up to the settinguntil the engine starts cavitating - losing speed you cant hurt it - all new engines have rev limiters 5.

This triton has it allinnovative tube design premium quality thrill. 2021 Manitou 21 Aurora LE VP. Start with the prop and then height adjustment.