This will help you detect if power is supplied between the upper heating element and blue wire.

Test water heater element. You see, there are one to two elements that work for heating. Turn off the breaker inside your main electric panel providing power to the water heater. Shut off power step 2:

Defective element testing you will need. Use a multimeter to determine if and how your elements are damaged. Poor wire connection last but not least, the problem might be in the.

Place the tester against the water heater’s metal shell. First turn off the breaker in your main electric panel to the water heater. Place the prongs of the multimeter on the terminal 1 and blue wire of the heating element.

Remove insulation and plastic cover from the thermostat. How to test and replace the faulty water heater element the first and the foremost thing you have to do is to turn off the measuring glass to the first side of the electric. Remove the access panel cover and insulation from the top or bottom water heater element (described above) connect the alligator clip or test terminal of your continuity tester to one.

Steps on how to test water heater element with continuity tester shut the breaker off it is the most significant step in testing your heating element. Remove access cover (s) from the front of the water heater. Turn off the power supply to the unit at the main electrical panel if possible;

Disconnect wires from the heating. You can test the element with a multimeter to see if it is. Testing a water heater element at a glance tools: