How to clean the filter in order to ensure your products performance is at its most optimum.

Shark duoclean filter cleaning. Cleaning foam and felt filters. To clean the foam and/or felt filters, rinse with cold water only. Do not use any soap or cleaning product that might cause damage to the filters.

Wait a minimum of 45 minutes for the vacuum to cool, then plug in the vacuum. In shark upright vacuums, the filter housing sits beneath the dust canister. To clean foam and felt filters, simply tap off loose dirt, then rinse them under a tap.

This process should ideally be carried out on a monthly basis. You have to separate the dust bag or dust container. You have to clean all of them.

Always let the filters air dry completely before reinserting them. Above) and clean filters as necessary. Simply grasp the filter and pull it downwards.

To reassemble, replace base by lining it up along the front of the nozzle. Always let the filters air dry completely before reinserting. This supports the following product skus nv800, nv800c, nv800w, nv801,.

Push down to snap into place. Wash filters to keep the suction strong. Before cleaning either of them, remember.