Learn how to clear / reset / remove tpms tire pressure monitor system light on chevy silverado ( 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | ls | lt | ltz | w/.

Reset tpms chevy silverado. Hold tpms tool on left front tire sidewall next to the valve stem repeat for the right front, right rear and left rear tires apply obd module to the dlc turn ignition on press ok on. Push the “set/reset” button, and the message “tire learning. How to program the tire pressure monitoring system to correctly display tire location on the vehicle information display without any special tools.

Turn on the ignition, with the engine off. Switch the ignition key to the on, or second, location on the ignition but don't crank the. If the learn mode cannot be enabled, ensure the tpm system is enabled in the pdm.

Someting like, (may be different in your vehicle) put on e brake, turn the acc on, and turn the light switch to off 3 times, you will hear the horn chirp, then you are ready to release. Start by disconnecting the battery: Press and hold unlock and lock.

You can reset it yourself, without having to take your truck to the mechanic. Turn on the ignition, with the engine off. This pressure level can be.

Turn ignition to on position (engine off) 2. This will help to prevent any further. Push the vehicle information button using the driver information cluster until “relearn tire positions” displays.