Insert a tapered punch into the punched slit between the retainer and nut.

Replacing wheel bearing honda civic. New wheel bearing & hub assembly from 1aauto.com. Remove the old hub and install new hub. I rotated both sets of bearings to make sure the new grease flowed into all the voids.

Doing the same with arranging the washers/plates to get the desired effect; Then, remove the wheel and brake caliper. These free detailed suspension and arms manuals were compiled by.

Make sure your parking brake is engaged. Remove the spindle nut cap and use penetrating oil graciously on the nut and inside end of the hub. Set the car on jack stands.

Remove the dust cap with a chisel and hammer. It’ll also cause the tires to wear. Set the caliper where it won't hang.

If you do have a bad bearing, replacing it is important. This procedure applies to all 8th generation honda civics as well as other model years with slight diff. To replace the bearings, first start with the car on the ground.

How to replace rear wheel bearings on a honda civic. The procedure involves removing the brakes and pressing. The wheel should rock back and forth easily.