Scoop up a small glob of drywall mud, then use your putty knife to spread it over the dent.

Repair dent in wall. I feel this would be an easier repair option and would. Allow the patch to dry and check for shrink back. Dents in walls are a part of life!

Remove all furnishings near the work area. Spread a plastic drop cloth at the base of the wall to protect the flooring. Repairing the dent on a drywall or plaster wall is similar to the dent in the car, but it is something that the homeowner can easily fix, no matter if it is drywall or plaster.

No need to overfill as there is virtually no. Place the vacuum cleaner over the dent and hold it in for about 30 seconds. Learn how to make your wall as good as new!

[1] pick up a tub of drywall mud and grab a putty knife from the hardware store. Plug in your vacuum cleaner and turn it on to the lowest setting. Fill the dent with either quick setting drywall compound or spackle and scrape it level with the surface of the drywall.

Depending on how deep the dent/bend is i would be tempted to advise cutting the whole section out and installing a plaster repair panel. You don’t need a ton of drywall mud—just add a thin. Fixing a dent in the wall is made easy with the 5 steps that we have put together in this guide.

Sand the surface lightly if needed to remove any sharp edges. Use a filling blade or scraper to firmly press selleys spakfilla rapid into the crack, dent or hole. Smooth on drywall mud with a putty knife.