Don’t forget to inspect the wiring if you’re repainting a boat trailer with several years of use.

Repainting boat trailer. Needs to be applied quickly. Cover the lights, reflectors, vin plate and any other identification marks with masking tape. Put the trailer on blocks or jack stands to make working on it easier.

Then you can focus in on harder spots where rust has built up. The trailer, rig and sails were in good order, and the mercury 9.9 outboard looked fresh out of the box. Wear protective clothing, gloves and eyewear before sandblasting, grinding, sanding or painting.

Paint the entire trailer according to the product instructions, making sure every inch is covered. #5 · may 3, 2010. Older wires are prone to corrosion and should be replaced every 5 years.

#2 · nov 22, 2012. Can be used on a rusty surface without the need for too much prep. One of the biggest headaches is painting a rusty boat trailer,.

I was surprised with the overall. Pulled them off and had them sprayed, made for a good grip and never. That makes the process of.

You need to remove rust before any new paint goes. Well sandblasting will probably be more $$ but, it will get it right down to bare metal in many areas. They bake in the sun, get soaked by the rain (often polluted rain), get frozen and thawed, chafe for months at a time.