As was mentioned before, you can use an electric tool or a chisel and a hand maul.

Remove tiles from concrete floor. How do you remove ceramic tile adhesive from. Removing the tile and grout. Lay it at an angle of.

Take all the furniture and large items out of the room so you can have unrestricted access to the work area. Begin with a broken tile or between two tiles. Try to situate the chisel under the tile at an angle of about 30 degrees so that you can easily lift it from the ground.

Then, start removing the tiles from one corner and keep going forward. The work will be faster if you start with the. Tools explicitly used to remove ceramic from concrete include:

You can do this by placing the masonry chisel at 30 degrees from the edge of the tile, you are. Masonry chisel — 1 or ¾ inch. If you're wanting to level the floor or lay new flooring directly on to the concret.

Use a putty knife to scrape the tiles off the adhesive attaching them to the concrete slab. Hold a chisel underneath the loose tile at a slight angle. Pull pieces of the linoleum floors to reveal the glue underneath.

Once all the rows are done, get rid of adhesive as well. If you pour a small amount of water on the tiles as you remove them, the liquid will soften the glue and reduce the amount of dust that can. Wet the entire area with the suds and let it sit for a few minutes.