Slip the compression fitting over the pipe.

Remove outdoor faucet. Remove the defective faucet by grasping it together with the supplying pipe. Tighten the nut to the fitting, using one. Open the faucet and drain out all the water that.

Wipe down the faucet with a cloth to remove any loose dirt. Remove the compression fitting from its package and unscrew the nut. The first step is to turn off the water supply at the meter.

Remove the faucet handle fastener by turning counterclockwise, then wiggle the handle and pull it straight up off the assembly. How to remove a stuck outside water faucet step 1. Here are some tips on how to fix an outdoor faucet that keeps turning:

Make sure you keep the supply pipe steady to avoid damaging the entire system. Then, rinse the rusty pieces and residue away with clean. Turn off the water heater, or switch it to pilot.

Unscrew the packing nut all the way, then slide it up the stem to. This will protect the pipe from being twisted. Turn off the valve that leads water into the outdoor faucet that’s already installed.

Slide the nut over your pipe. Before you try the following methods, soak the connection in undiluted white vinegar, then scrub the corroded areas with a wire brush. Cover up the areas around to avoid getting sprayed.