After which, pull the handle completely flat and remove all of the loose strap or pull.

Releasing a ratchet strap. How to release a ratchet tie down (tutorial) 509,332 views mar 12, 2016 in this video, i show you how to release a ratchet tie down. Loosening a ratchet strap should be the same for both assembly types. You need to get the ratchet fully open in order for it to release.

To release the strap from the ratchet, you need to make sure that you are putting pressure on the manual pawl. Double it over and thread the strap back over and pull it tight to take out the excess strap. So, to release the strap from the ratchet, you must ensure you apply pressure on the manual pawl.

Once the ratchet is all the way back you can move to the final step. You do this by disengaging the two pawls. Make sure the open slot is pointing up.

To release the strap from the ratchet, flatten the ratchet by squeezing the manual pawl lifting it eventually. Make the strap tight by pulling the slack through the mandrel. So, to release the strap from the ratchet, you must ensure you apply pressure on the manual pawl.

Attach the hooks that are attached to the ratchet into position, and do the same with the. The release catch, also known as the release lever, is a smaller handle that disengages the ratcheting handle. Open ratchet until it is completely open and flat (figure 7) 3.

This will cause the manual pawl to rise and create space for the ratchet to come. Open the ratchet until it is completely open and the. Step 1, use the release catch to open the ratchet.