Reapplying a stain or finish completely restores the wood to its original luster.

Refinishing hardwood floors under carpet. When wall to wall carpet became popular in the 60's and 70's, many wood floors were covered up. Start in the corner of the room and pull the carpet loose from the tacks with the pliers. Doing so is far from impossible, however.

If you observe any holes in the floor, you. Then with a floor polisher spread it evenly. This process can be periodically repeated for as long as you own your home.

If the carpet was glued into place, remove any residue left behind by applying a. Here's how you remove c. Let it dry for a day for the best.

There are hardwood floors underneath that we're excited to refinish. Start with coarse and remove all of the old stuff exposing the bare wood. Remove any tack strips from around the edges of the room using a chisel to pry the strip away from the floor.

Timelapse of carpet removal exposing hardwood floors you my diy refinished hardwood floors are finished. Then, you’ll run the medium and fine sand paper over the bare wood to smooth it all. Work your way along the walls and continue to loosen the carpet.

Hardwood can really last for hundreds of years (in fact, i’ve refinished floors that were made in the 18th and 19th century. These 1960s hardwood floors just needed to be polished and restored. After all debris and glue strips are removed from the floor, you are ready to begin the cleaning process.