This blog post will show you how to align garage door sensors in ten easy steps!

Realign garage door sensors. Firstly, you’ll need to cut off the power to your garage door properly. In this video i show you how to realign your garage door sensors so that the garage door can function properly. Do the same on the.

Connect the new sensor to the old white wire using another blue wire nut. The 8 steps to align garage door sensors 1. Turn off power to the sensors.

If you have additional questions, our office will also be happy to walk you thru it over the phone. In the end, tie a string to connect the sensors and check if they are level. The first step for aligning your garage door sensors is safety.

Repeat with the other sensor. Adjust each unit to 6” off the ground. If everything is fine, place the wing.

In the early 1990s, new laws were put in place to help keep homeowners from being injured by closing garage doors. Disconnect power supply to the garage. Using a screwdriver or pliers, loosen the screw holding the unit into the mounting bracket.

Lay a spirit level over this, and check if it’s level. Unscrew the screws holding the sensors. To begin, loosen its screws and detach the sensor out from the bracket.