As well it avoids the wheel paint overspray from getting on the.

Prep aluminum wheels for paint. First take a paper towel wet with acetone and lightly clean the surface of the wheel. Procedure is as follows, soap and water with red scotchbrite to prep surface, let air dry , clean with wax and grease remover, apply metal etch primer, apply top coat in the. Next, go over the aluminum with 320 grit sand paper on a da sander.

Make sure to wear safety glasses when cleaning your rims. Step 4 use the pressure washer or the hose to wash off the soap and excess dirt. Sand the wheel (to make sure that the paint sticks to the surface);

How to paint aluminum wheels. Step 1 i bought a rust / paint removing scrub brush for my drill. After sanding, use a blow.

Move the hose back and fourth over the. Some wheels are have a lacquer clear, while some. Be sure not to leave behind any lints.

This will make the job much easier. With the powder applied, place the wheel in the oven making sure that it has been preheated to 400 degrees f. This step can be done by hand but for the best results a da sander should be used.

This would also be a great resource for others. It takes 30 minutes to dry to the touch and one hour to completely. Mask the tire with masking paper or newspaper and use masking tapes.