If you have no idea what length to go for 48 is the agreed upon safe option.

Pontoon trolling motor length. Most pontoon boats could really even get away with a 48 shaft but it is certainly better to go a little longer than you need. Pontoon Trolling Motor Buying Guide. But Which Specific Trolling Motor Is Best.

If you have a bow trolling motor you need to measure the length between your boats gunnel and the waterline then add an extra 20 inches. They must assume that they fit some pontoons but obviously they dont fit most from the replies Ive received. An enjoyable experience is determined not only by the horsepower of the motor but also a correct adjustment of your trolling shaft length.

For safety you should add about 20 inches to the distance between your transom and waterline to get the appropriate shaft length. The best option is buy a 55 lb use it with little to no wind and not even try to use a trolling motor regardless of its. A shaft of the required length must be able to go underwater from the edge of your pontoon boat.

Generally speaking the average shaft length for a trolling motor is around 60 or 152cm if you intend on mounting the motor on the bow of your boat. Motors mounting to the bow should have a longer shaft than those mounted to the engine or transom. Since the pontoon boat has a high deck the shaft must be longer than what would normally be utilized on other types of boats.

To get the correct length if you have a transom trolling motor the general rule is that the top part of the motor should be submerged 12 inches in the water. The 24 feet long pontoon boat owners are happy with 65 to 80 pounds of thrust. For the Minn Kota add 20 inches while for the MotorGuide add.

The Pontoon Series as the name suggests was designed with pontoons and deck boats in mind. The shaft is adequately long at 55 inches and the head tilts so that you can easily stow your motor. Selecting the right length may depend on your necessities but the most common for pontoon boats is around 60.