When you trim down it brings the lower unit back towards the boat.

Pontoon motor position. It has a horizontal bracket which allows this trolling motor to be mounted on the bow of your pontoon. Once everyone is seated you are ready for takeoff. Pontoon Boat Motor Maintenance 101 Tips from the Experts.

Store the outboard. The most common and affordable trolling motors are designed for transom mounting. The motor should be placed high enough without causing any ventilation that may reduce water pressure.

Next untie the ropes that are connecting the boat to the dock. You can perform this function using a button located on. The shaft is adequately long at 55 inches and the head tilts so that you can easily stow your motor.

Do not use the tilt support lever or knob when trailering the boat. The outboard motor could shake loose from the tilt support and fall. The all-around performance can be achieved by a 175HP motor.

Modern triple tube pontoon boat sometimes have the motor pod as a part of the center pontoon. The Pontoon Series as the name suggests was designed with pontoons and deck boats in mind. Pontoon boat size and power requirements are growing as fast as the presence of these watercraft on waters all over the world.

Offered in lengths from under 15 feet to more than 30 in length overall with double- and triple-tube configurations pontoon boats are currently hot with boaters. An adjustable transom was popular years ago when pontoons used 20 HP engines. Water trapped in the cooling passages or rain water collected in the propeller exhaust outlet in the gearcase can freeze.