Cut planks larger than the pallet christmas tree stencil dimensions.

Pallet wood christmas tree diy. Adjust your miter saw so it cuts an angle on the opposite, left side. Join the planks with either a kreg jig or smaller horizontal board supports screwed in from the back. Build a christmas pallet tree.

Cut the largest base board of the diy wooden christmas tree. Web the simplest and basic pallet wood christmas tree is a pallet wood shaped to a triangle which was cut from a single pallet. Dismantle pallet start out by breaking down the pallet itself.

Wipe off the dust with a soft cloth. You could also lay down a tarp to catch shavings for an easier clean up. Web 1 prepare your work area.

Get your pallet (fully intact, not disassembled); We made these merry and bright decorations from two old pallets we had lying around (along with some 2x4s leftover from other projects). Using a miter saw, cut one end of the 2×6 at a 31.6 degree angle.

A flat, sturdy work surface, like a work bench. Web crowbar hammer jigsaw pencil large ruler wood stain or paint assortment of ornaments and lights safety gear the best part about this diy decoration is that the only cost associated with making them is the cost of the nails for the base of your tree. Web put one on your front porch as a backdrop, or a pair of them in your front yard like were planning.

The bottom board is for the body of the tree. Web pallet christmas tree supplies: Use painter’s tape to draw diagonal lines across the pallet in the shape of a triangle (refer to the image below);