Sanded the lower unit this morning , cleaned with compressed air and wiped it down with paint prep rag.

Painting outboard motor lower unit. The lower unit (or gearcase) is the part of the outboard that takes the power and rotation from the engine and transfers them to the prop shaft and the propeller. Once it's cleaned, use whatever tools you have at your disposal to sand the paint off the entire midsection, clamp brackets, trim unit, swivel bracket, steering arm and lower unit. Wondering if any of you have used with success line x or rhino liner or.

What's the trick to painting a merc lower unit and preventing the paint from coming off? In this video i weld, straighten bog and paint the lower unit from my johnson 30hp outboard. After coming out of blast cabinet the surface is a bit rough.

Primer paint for outboard lower unit postby dtmackey » fri apr 27, 2018 4:00 pm i would do the following: Place the oil pan underneath the prop. 1 oem mercury marine verado silver spray can touch up paint 12 oz sku:

Painting an outboard lower unit. Lower unit rebuild & repair outboard clinic restores and rebuilds all outboard lower units. Use a degreaser such as starbrite ultimate extreme clean to remove grease and dirt from around the bracket and under the motor.

Today's video is about painting an outboard lower unit and it's proudly sponsored by marineengine.com. This causes the propeller to. 10 paint for outboard lower unit:

Prep the surface with a sandpaper or scuff pad, about 180 grit if. The function of your lower unit is to convert the power from your engine to rotate the prop. Mask off the area to be repainted, chosing lines for the tape that blend with natural lines on the lower unit.