#4 · feb 23, 2011.

Painting a jon boat with rustoleum. I then painted the outside of the hull with marine grade topside paint and the inside with regular rustoleum paint. Today we are going to give the aluminum jon boat a new camo spray paint job and see if we cannot help her out as she changes her spots. The most economical way would be, lightly sand, blow off dust, wipe down with denatured alcohol ,roll on rustoleum marine paint primer and finish with a lighter color.

My first boat was an aluminum 14 ft, i had it sand blasted and then primed and painted. The plastic prevents the gel from drying out which allows it to penetrate through every layer of paint to bare aluminum. 1) painting your boat does not put you in violation of voc laws,but you have to.

Some people even have access to a sand blaster. Regardless of the materials used to build your boat, you can sand a jon boat by hand or with electric sanders. The hunter’s kit also includes.

The jon boat is finally painted! Paint in horizontal strokes for an even coat. My boat is stored on a trailer so i figured this scheme would.

Totalboat aluminum boat paint for canoes, bass boats, dinghies, duck boats, jon boats and pontoons (light gray, quart). The kit comes with four cans of spray paint each containing a different color. Using a sprayer or brush, paint the inside of the boat first.

I just washed it before and put multiple thin coats on it. Once your boat is in position, and you have the equipment ready, what follows is sanding down the surface to remove all paint and wax and to create a smooth. Above the spray rails was a couple of old coats of brushed on paint.