Create a tension lever and a pick tool using bobby pins.

Open lock with bobby pin. Now insert the tension wrench tool (hairpin a) into the bottom of the lock. How to open a door with a bobby pin within 7 steps only. Push the rest of the pin to the left, bending the end of the pin slightly in order.

The flat side should be the one that is facing up. The function of this instrument is to implement a. (1) open and bend the bobby pin at the angle of 90 degree.

Insert the tools and start picking. Place the pick tool on the upper part of the. Separate the wavy and straight ends of the hairpin so that it bends in the center.

Pin bends at the center point, and it looks like an l alphabet. Insert the tension lever at the bottom of the keyhole. Then insert hairpin b into the middle of the lock all the way back.

To open a locked door without using a key with a bobby pin, do make use of the following steps: The method to diy lock picks using hairpins: These are the type of locks that can easily be bypassed with a bobby pin.

Stick the pin into the lock about one centimeter with the flat side facing upwards. To pick a camper lock using a bobby pin, you are required to have two basic tools: Insert the pin into your lock approximately one centimeter deep.