The center of the toilet flange aligns with the middle of the toilet bolts that hold the toilet bowl in place.

Measure toilet rough in. The middle of the toilet flange corresponds to the centre of the toilet bolts that. Standard toilet rough in dimensions. First, measure (using a tape measure) from both corners to the center of the bolt caps, then mark.

If you buy a 10” toilet for a. Get it wrong, and your toilet just won’t fit. Make sure to measure the distance from the wall (not the skirting board) to the center of the flange.

However, you can’t just assume that you should buy a toilet for a 12” standard rough because 10” and 14” are also possible. The distance to set the toilet flange from the back wall. The necessary clearance from left to right.

The standard toilet rough is 12”. Measure the distance between the. Some older homes come with 10” or 14”.

Take care to not include the baseboard in this measurement. It simply means that the distance between the rare wall and the toilet’s outlet drain is 10 inches. You want to measure the distance from the wall to the bolt caps at the center of the discharge.

The rough in measurement is simply the distance from the centre of that outlet to the wall behind it. The corner toilet is located in the bathroom’s corner, which requires measuring differently. The general rule of thumb for clearance from the wall that faces the bowl is 24 and just about.