So, drain all the water from your pool first.

Level ground for above ground pool. 1.3 the ground pool will look wrong. How to level the ground for your swimming pool clear the area. Since there is so much weight on the wall, this is a vital step.

After that, put the high spots into the low spots. Place 2x4s on the site and place a level on top. Level the ground for a pool:

Place 2×4 planks from the center of the pool site to the outer edge, using as many planks as needed to reach the border. Check with your local municipalities and utilities before you start removing sod or digging up. Now we come to the point of how to level the entire bottom track area of the pool.

Following that, you can start to lift the pool. Locate the blocks for leveling on the lower area of the pool and pull all of. If the level is below the skimmer mouth, then we have a leak in the pool.

1.1 the water level will be irregular. Dig out the higher slopes. How to level the ground for an above ground pool step 1:

Using a builder’s level is recommended, because the same reference point is used for every block placed. If the pool is full with water, drain it. If you don't know where the center is, but you know where two pool edges will be, we can use relative positioning.