Place the valve box in a hole that's lined with 2 inches of gravel.

Installing sprinkler valves. Dig out the area where ground valves are to be installed, and add several inches of. Snake and frog clogging up the pipes. Never just bury the valve in the ground.

When you are installing a irrigation sprinkler valve, make sure you always put a valve box over it. In order to install the system, you need to dig up trenches to place the pipes. This is where the string that was used to chart the layout of the pipes comes in handy.

Glue the manifold together as you attach the zone valves. The first task is to flag the location of each sprinkler valve according to the sprinkler system design. · buy stop & wastes · buy valves · buy line drains installing sprinkler heads be.

Now that those are finished (see part 1 of installing sprinklers), putting in the sprinkler system itself is much simpler. Be sure to place the manifold in the valve box. Installing an irrigation system is a great way to keep a lawn green through even the doggiest days of summer.

Refer to the valve instructions for manual operation. Dig shallow ditches with a spade (hard way) or rent a gas. At the end, dig a hole about 18 inches deep and 2 to 3 feet long.

It would be best if you did this with each valve. Using different colored flags for. If you know you’ve kicked.