Use a thin shovel to dig a trench under the removed concrete.

Installing shower pan on concrete floor. To install the explainer pan, follow these steps: Fit the shower tray over the bed of adhesive and firm down ensuring the tray is level in all planes identify the position of the drain and trap. Run a drainpipe under the concrete floor shower stall on concrete a shower usually.

On the concrete base, apply some amount of mortar. If the shower drain is a prefabricated unit with a pvc pipe, cut the pipe to the correct length with a hacksaw. Make a new drain line.

I have a 2 inch abs drain coming through the slab floor (with a trap below the concrete). Once the cement dries, put gaskets on the flange and place the pan over the drain. Remove the trash and dispose of it properly.

Now, you have to screw the drain at an appropriate place. If you notice that it is not, just break the concrete and. Lay a 2 x 2 around the entire.

For a wood slope, let's use an example of a 4' x 4' shower. If you are using a cast iron or abs pipe, use a jigsaw to cut. I’m ready to install the shower.

The drainpipes can exist about 2 inches in length above the concrete. Secure the drainpipes for the drain assembly. Cut a short length of pipe and install the shower flange, securing it with the rubber compression ring included in most kits.