The first thing you should do when winterizing your sand filter system is to perform a backwash.

How to winterize an above ground pool with a sand filter. Put a winter cover above the pool. Then, remove your skimmer basket, but keep it nearby. Add 4 ounces of liquid algae control for every 4,000 to 5,000 gallons of pool water or as directed.

The next step is to move the valve to the winterize position. After the water is running clear from the nozzle, turn off the power. Remove all pool accessories & pool equipment.

Otherwise, the freezing water may boost and pop out the air pillow. Clean the pool from all the debris and vacuum it properly. This is everything you’ll need to get the job done in just a few hours’ time.

Now that your sand or other media is as clean as it can possibly be, you can turn that valve to the ‘winterize’ setting. Test the alkalinity and ph level of the water and. Put the cover of pool.

Mix the control with cool water in a clean bucket. Adjustable sheet metal hole cutter / how to make cyber security training fun / how to make cyber security training fun It will force the water out of the pump and drain.

You’ve now sorted out the top mount valve of your filter pump, but your filter tank is. Clean and store the filter. Blow through the sand filter, pump, and heater.