Put the cover of pool.
How to winterize above ground pool with sand filter. Clean the pool from all the debris and vacuum it properly. Store the basket and other. 4 steps to winterizing a sand filter.
This is everything you’ll need to get the job done in just a few hours’ time. Then, remove your skimmer basket, but keep it nearby. Test the alkalinity and ph level of the water.
You’ve now sorted out the top mount valve of your filter pump, but your filter tank. Check the alkalinity, ph, phosphate, and calcium levels to see if your pool is safe. A swimming pool must be properly winterized when not in use during the cold winter months.
The first thing you should do when winterizing your sand filter system is to perform a backwash. Blow through the sand filter, pump, and heater. It will force the water out of the pump and drain.
After the water is running clear from the nozzle, turn off the power. It is time to cover your pool after all the things are done finally. Put a winter cover above the pool.
To winterize an above ground pool, begin by cleaning out your pool and removing any accessories. This bypasses the filter tank and only sends the water through the filter head. You will need the following: