Connect the pool drain plug to a 5/8′′ garden hose.

How to winterize a summer waves pool. As per guidelines, intex will always recommend you disassemble your pools and store them before the winter begins. Here’s how to winterize an aboveground pool ~ in just 7 steps! How to winterize an inground pool:

Keep your pool chemically balanced. Turn the pump on and you should see the water flow out the backwash pipe or the hose. Add 4 ounces of liquid algae control for every 4,000 to 5,000 gallons of pool water or as directed.

Note lower pressure on filter tank, and increased flow rate. After backwashing and rinsing out the filter, turn the power off. In the weeks leading up to the closing of your above ground pool, make sure that you keep your pool as chemically balanced as possible.

If the ph is higher than 7.6, it means the water is too basic and needs to have an acid added to it. Check that the drain plug within the pool is in place. Fold the wall part of the mater.

My pool was a complete sheet of ice and frozen all the ways down to the. How do i winterize my intex style above ground pool?answer: Turn the multiport valve handle towards the backwash.

This is because most parts of the component cannot. Shut off the pump, turn valve back to filter, turn filter back on. Can you leave your pool outside in the freezing cold answer to that question is yes.