Each chain is responsible for a particular function of the clock.
How to wind a howard miller grandfather clock. However, they can go 10 years without you having to. The following procedure, if done every 12 hours, or morning and evening, should give you the best results: Winding your clock insert the winding key into the holes located in the dial face.
Push the winding key into the holes on the dial face. Turn the key clockwise until the spring becomes tight and will not turn further. This will give you access to the.
That length is normally adjusted with a nut at the very bottom of the pendulum. Turn the key clockwise until tight. Position your clock in the desired area of the room and ensure that your clock is stable and does not tip over.
Dip a small nail in the oil and then just slightly touch each divot hole with the end of the nail. Depending upon the model of your clock, there can be 1, 2, or 3 winding key holes. Wind the clock once a week.
Howard miller clock oiling instructions. Tap the instrument lightly to release any latent action. 1 after the grandfather clock stops chiming 12 gently grasp the hour hand only and move it either way to the position of 12.
The time keeping of a normal mechanical grandfather clock is adjusted by changing the length of the pendulum. On a foil label that you’ll find inside the front door, however, if the clock doesn’t have a front opening door, foil labels and serial numbers are on one of the inside rails. To give you a preface of the things that we’ll be discussing and the things that you can do to get a gist of the age of your howard miller clock are as follows: