The first is htv or heat transfer vinyl stickers, and the second is decal stickers.

How to use heat press machine for cups. Place the heat transfer paper (with your design facing down) on top of the. Remove the upper flat heat platen by unscrewing the screws with your hand take away the upper flat heat platen to the side place the plate pressure and hook it to the main. Make sure that it’s lying flat and that there is enough room around the edges for the press to close.

Use a sublimation ink for printing and a sublimation paper to print on. Before placing the mug, preheat the press. ④plug it at your reach so that you won't need to.

②remember to plug it in its own outlet. The best way to preheat the machine is to turn the mug press on and raise the temperature to 100°c for approximately ten to fifteen seconds. There isn’t one fixed temperature that you use for all pressing.

Using the hpn signature series mug press. Now place the mug press close to the main machine and hook its wire into the digital panel. These are some of the best that i have found on youtube!

Wrap the sublimation paper ( which we prepared earlier ) and apply some heat resistant tape on the seam to tightly wrap the sublimation paper. ③always keep it out of the reach of children. If you use too high a temperature, you can scorch.

Wrap a silicon paper around. The packaging of your transfer paper will tell you how to set it. Vinyl stickers can not be used to.