In this video today we will show you the step by step guide on how to use a ratchet strap.
How to untighten a ratchet strap. Pressing the bar under the handle. Open the ratchet all the way, and the webbing should release and become loose. In loosening the ratchet, it should be in a locked position.
Open the ratchet until the ratchet is fully open and flat. From the bottom of the ratchet hardware slowly thread the. Start by opening the ratchet handle hardware and align the opening slot of the ratchet is pointed upwards.
We will demonstrate how to tighten a ratchet strap and how to rele. How to loosen the ratchet. Open the ratchet lever and move the slot of the empty winding drum into the threading position for the webbing.
If you need to loosen the tether: Pull all the excess webbing through the ratchet so when you tighten the strap it won’t get jammed. Close the ratchet back down.
In this step, you have to prepare. Make sure the ratchet is locked. The strap should lay straight and overlap with the second half of the strap on the opposite side of the ratchet.
Now you’re only going to have to apply gentle pressure on the bar below the handle of the ratchet which will release the spindle of the ratchet letting the. Press the release on the level and pull the ratchet handle at the same time. This video shows how to use a ratchet strap or tie down and just as importantly take it apart again.have you ever spent hours wondering how to use a ratchet.