If your whirlpool washer door is locked and the light is flashing, there are a few possible causes and fixes.

How to unlock whirlpool washer front loader. So, drain the water by running the washer’s drain/spin cycle. However, if there’s a blockage, you’ll have to drain it manually. Before you can unlock your washer, you need to make sure it’s plugged in first.

Find the release ring below the locking mechanism. Pull the plastic tab on the right side of the panel. Lift the panel away from the body of the washer.

Pull whirlpool duet front loader washer away from the wall. Pull down on the bottom panel and pull it away from the washer. Look for the unlocking button of the washer.

On most front loader washers, there’s a small hatch right on the front that lets you access the drain hose. This releases the locking mechanism. Turn the dial or press the button to pause or stop a cycle if you’re in the middle of it.

The door of the whirlpool duet washing machine will lock and unlock automatically based on a number of preset conditions. Press the button labeled l left. To unlock and open washer door:

Unplug the washing machine and turn it off. Check to see if the door opens for 5. Remove the lower door panel by pushing the tabs located on both sides of the base panel to release it.