Vukgripz hockey grip tape is made for your hands and not the blade.

How to tape the top of a hockey stick. You can tape from toe to heel or heel to toe. You will need a thin strip of tape to apply to the bottom of the blade before you proceed with wrapping. By going in this direction, the tape will lie flat on.

While keeping the tape angled at 45 degrees, make one revolution around the hockey stick. The setup here is the traditional candy cane method. Always start and finish your tape job at the top of the blade!.

First thing, cut away the old tape. Using either white or black tape, you will be starting from the heel of the blade and working your way to the toe. Start by angling the rolled up piece up tape at a 45 degree angle to the top of hockey stick.

For the grip i do a few looks around the top of the shaft, then do a few inches of the. Begin at the top of your stick, wind the hockey tape around the top of your. I start almost at the toe and tape until about halfway down the blade.

Finally, go around the toe, pinching the tape where the excess was cut off making sure it all sticks together. Taping a hockey stick blade. The tape at the blade can also keep the ice and moisture at bay.

Heel to toe makes for easier trimming and leaves “seams” that face the heel. The tape needs to be smooth and centered on the edge of the blade. It also impedes the puck.