You should be able to slide it horizontally and remove it from the channel to expose the nails from the second row down.

How to take siding off. Spread a thin layer of goof off over. If you are having your siding replaced, doing thi. Once all the nails are removed, unhook the siding piece by pulling straight down and out.

Slide your zip tool back and forth,. Take out your tape measure and check the length and. Use a thin magic bar, tap it up under the bottom of the board, and pry very gently.

One of the simplest recipes that help clean paint off vinyl siding includes mixing goof off or goo gone with baking soda. 6 easy steps to remove vinyl siding step 1: Work your way along the board until you have some clearance under it.

Secure the buttlock of the upper panel to the top edge of the new panel, using the zip tool. Grab the lip of the buttlock with the tool and pull it over the new. Next is to find the corner or the outermost edge of the aluminum siding and slide or wiggle a siding removal tool or underneath the bottom edge to.

Aluminum siding is very sharp and can easily cut you, so before you do anything, put on a pair of work gloves. Wood or concrete siding will have to be cut away using a circular saw. Insert the screwdriver into the bottom locking edge and pry down and out on the edge until you can grab and pull the bottom edge outward and unlock the corner, slide the.

Remove the siding by gently pulling off the sheet from the trailer. Step 2 peel it back. Insert your zip tool into a gap between the section of siding you select and the one covering the edge of it.