Place the magnet on a flat surface and lay the tag on top of it with the ink dome or cartridge facing down.

How to take security tags off clothing with rubber band. The section of the tag that protrudes from the plastic is the ink cartridge. You can also use 2 pairs of pliers. For ink tags just freeze the garment and the tag then rip it open.

Basically, you wrap the rubber band around the pin until it loosens, then pull the tag out. In using this method to remove a security tag you need to hold the tag together with the cartridge of the ink side up. 1 wrap a rubber band around the pin several times and twist off.

After it is frozen you should try to rip open the. Another method that you can use to r emove security tags is by freezing the tag. Basically, you wrap the rubber band around the pin until it loosens, then pull the tag out.

Place the tag’s ink cartridge face down. Use the screwdriver to remove the metal plate while lifting the pin from the inside and pull off the pin. Always remember to search for, and remove all tags before leaving the.

2 these shapes include round, square and pencil shaped tags. The cashier accidentally left the tag on. Pull the part of the clothing with the tag away from the rest of the clothing.

Move it as far away as possible so the ink doesn’t ruin the clothing as much if the sensor cracks. Do not attempt to freeze the garment and remove an ink tag. For ink tags, just freeze the garment and the tag, then rip it open with.