Learn how to replace a bathtub faucet with our helpful guide.

How to take off a bathtub faucet. #thehomedepot #homeimprovement #diysubscribe to the home depot: Turn the pipe wrench counterclockwise, loosening the bathtub spout. Hook the jaws behind the faucet handle, insert the threaded rod through the hole for the set screw and tighten the handle by turning it clockwise.

Remove the old faucet first. Firstly, find out if there is a set screw. Finish unthreading the spout by hand, then pull it away.

Be careful not to damage the casing. To install the new faucet, you need to take off the older one first. Removing a bathtub faucet with no screw is not as difficult as it may first appear.

So, the cloth will catch anything, if you by. Once the spout is loose enough, you can remove the wrench. First, turn off the water supply to the shower so it becomes easy to fix the issue.

Use a spatula knife or razor to remove the sealing at the wall end of the tub spout. Seal around it with silicone caulk and screw on the new spout. This causes the gate to seat fully, shutting off the water.

If it’s stuck, insert a flat head screwdriver into the slot where the set screw was and pry it off. Many people refer to the bathtub spout as the bathtub faucet. You will need to pull slightly as you turn the fixture to engage any remaining stripped threads on the tub spout.