![How to Shock Chlorinate a Well to Kill Coliform Bacteria and Odors](https://yourh2home.com/wp-content/uploads/2019/08/Well-Water-768x512.png)
Circulate the water content to ensure the chlorine mix so well with the water.
How to shock a well for coliform. Especially if it has iron or manganese in the water. Circulate the water by connecting a hose to the faucet closest to the well. Shock chlorination is a method used to disinfect a well by introducing a high quantity of chlorine into the water for a brief period of time.
Coliform bacteria can enter the well water through the following ways. How to treat coliform in water. Turn off the taps and leave the system alone for 12 hours so the chlorine has enough time to kill the bacteria.
Shocking a well is usually only a good idea to do once. Flush well for 10 minutes, longer if well is over 150ft deep. A common question homeowners on well water have is how to shock chlorinate a well.
How to video on the process of shocking a well to remove the coliform. To get rid of coliform from a well you need to pour bleach into the well and circula. This page details the most common and effective ways of treating coliform in well water:
Now that the chlorine is in the well, it is time to circulate it around so that the whole well gets disinfected. Normally, it is not a good idea to shock a well on a regular basis. Coliform bacteria are typically removed through chemical disinfection.
Always add the pellets to standing water and. Shock chlorination plumbing & septic tank maintenance continuous chlorination uv purification To remove the bleach, pump the well water.