It s recommended you add a gallon of liquid.

How to set up an above ground pool chemicals. Summary for chemically starting up an above ground pool filled with municipal water 1 shock the pool 2 adjust the ph (if it really needs it) 3 drop a 3” chlorine. This is a good target for pool water. Add alkalinity increaser to raise total.

The three most important parts of pool water chemistry are: First, check that all valves are open. Steps to open your swimming pool step 1 turn on your filter system and add the correct amount of saltto the water for your pool size.

Once the pool is opened and the floor and walls have been brushed the first chemical you should add is chlorine to shock it. Sodium bicarbonate if you use a dash of this chemical, it will help you increase the pool’s. Test the pool water and balance it to the recommended levels below as soon as the pool is filled:

Even though they are not used all year round, it is still vitally. Walled above ground pool set up if you have an above ground pool with solid walls, you’ll need to: They are more then happy to help if you get any weird water and need a test ran by the pr.

Add chemicals as per the above ground pool’s opening procedures. For sand and de filters, place the multiport valve into the “filter” position. Add both bottles of stain away following the directions for use on back of the bottles.

Highly suggest you visit a local pool supply store if you have one. Ph increase and ph decrease. Understanding whats in your water, and what isnt, is the first step to balancing it.