Insert a compatible battery into your laser and level the ground plug a compatible battery into the battery port and use physical tools like hoes to level the ground for.
How to set grade with laser level. Set up the laser level on a tripod stand on firm ground. If slopes of more than 10% (1:10) are required, which is outside the range of electronic adjustment of the rotary laser’s prism; For that, you will have to place the bottom of the grade rod at.
For manually leveling laser levels, use the adjustment screws and ensure the bubble is at the center. How to set a slope with a grade laser level. Connect the compatible battery to the laser level you have.
Set the tripod on firm ground and attach the laser level to the head of the tripod. A continuous laser line makes it easy to spot the areas that are affecting your smooth, even. Setting a slope with a grade laser level is straightforward.
First of all, place the tripod on a surface you are going to even. How to use a laser level for grading? Set up the laser level the first thing that you need to do here is to get your tripod and set it up on flat and dry ground.
The tripod head should be reasonably level. Don’t use other battery that is not. Place the laser level at the desired height the next step is to find the initial height where you want the grade.
Line the desired axis of the laser up with the direction of fall (or rise). Just follow my below steps for how to use a laser level for grading? Make sure to spread out the legs of the tripod at.