If you’re using a dustless drywall sander, don’t even try to dip it into the.

How to sand drywall with a sponge. If you want to lower dust and debris spread, wet the sanding sponge while using it on the joint compound. Place a bucket of warm water on the floor beside the drywall. When your joint compound is nearly, but not completely dry, soak your sponge in the water and.

Instead of sanding the patch, consider using a drywall sponge. You’ll have to rinse the sandpaper or sanding sponge onto the bucket of water. Also, the preparation you should take is almost the same as before.

Using a sponge on drywall achieves the same thing, but instead of using sandpaper, you use a wet sponge and wipe it using a circular motion across dried joint compound to. Hold the feathering sponge so the abrasive side faces the wall and use a circular motion to sand dried joint compound on seams and screw dimples. Dry sanding produces clouds of dust,.

While it takes a bit longer than sanding, a drywall sponge greatly reduces the amount of dust in the air. Allow the drywall mud to dry if it hasn't already. How to make drywall mud smooth with a sponge 1.

For more tips on drywall sponge sanding see below!home improvement expert and contractor danny lipford hosts this weekly series, inspiring homeowners with ad. Rinse the sanding sponge with water to decrease the amount of dust and debris. A test and review of a standard type of wet sanding sponge for drywall and plaster.for dustless drywall repair.

Pass the sanding sponge lightly over the surface of the lumber to provide a fine finish to the surface. Follow the safety measures as stated above. Recoat with more mud and let it dry before you sand it.