Pour drain cleaner inside the drain pipe and leave it for half hour.

How to replace bathroom sink drain stopper. This will make the process much. At this point, the stopper can be pulled out with no difficulties. Lift up on the sink stopper to pull it out of the drain, taking care to avoid damaging the stopper.

Put your stopper in the “up” position. Easy to follow steps to replace a bathroom sink stopper. This is the position where the sink should drain.

This will make the whole drain pipe clean. Over time the pivot rod corrodes and the tip breaks off, which causes the stopper. It can be quite nasty, though, so it’s a good idea to clean it before putting it back.

It’s time to shine some light on the issue. Rate this post contents show 1 how to fix a sink drain stopper 2 removing the stopper, lift handle, and connectors 3 disconnecting the sink stopper drain 4 attaching the. Set your flashlight up so that you can clearly see everything underneath the sink.

Pull up on the pushrod and the lever pulls the drain plug down, sealing the gasket into. (see below for a shopping list and tools.)sub. When time is completed clean it with hot water so all the debris.

This is the moment when you take the bucket and place it under the sink. The other side of the detached rod should be connected to a pivot nut that you have to unscrew. Replacement stoppers are available, a scratched or damaged drain plug can be removed and replaced.