Remove the tie rod end from the steering knuckle.

How to replace a tire rod. How to replace tie rod ends? This could simply mean your vehicle is out of alignment, but could also indicate loose tie rods that should be addressed before doing an. The total cost to complete the job is $375 using a factory part and about $319 using an aftermarket part.

Once your vehicle is elevated, you can remove one of the front wheels from the vehicle for easier access. Remove the outer tie rod. Screw the tie rod end.

How to replace inner and outer tie rods. To get the repair done for $610 using a manufacturer part and $430 using an alternative part, the total cost is $609. Look at the tread of your tires for uneven wear.

Top 6 bad tie rod end symptoms. Use new clamps and tighten them down. If the current tie rod has a castle nut, use needle nose pliers to pull out or break off the cotter pin.

Here’s the breakdown for you. The tie rods don’t take long to replace, so labor is only going to run. The next step to replace the tie rod is to remove the cotter pin to do this use a plie to straighten the cotter pin and pull it through onside and use a rachet to take the castle nut off.

0.4 hours of labor is required to replace an outer tie rod. If possible, measure the length of the tie rod. 2) the steering wheel moves freely.