If you try to do this yourself, turn off the power and the water to the sprinkler head before you start.

How to replace a sprinkler solenoid. And it doesn’t matter which color. Unscrew the valve bonnet from the valve body. That means your sprinklers will keep running after they’re supposed to stop.

Remove the two wire connectors on the wires leading to the bad solenoid, then untwist the wires to separate them. The valve solenoid may get stuck open, allowing all or a trickle of water through at all times. Also, when opening the valve, be particularly careful.

When you get to the valve, you can just unscrew it counterclockwise. Trade platform for china replace solenoid on sprinkler valve manufacturers and global replace solenoid on sprinkler valve buyers provided by chinax.com. A problem with the plunger can prevent the solenoid from closing the valve when it’s time.

Home > 19364 results for replace. There are two ways to replace a valve, either replace the top (guts) only with new parts or cut the entire valve out and replace it with a new unit. When a sprinkler valve stops working or there is a leak around the solenoid of your sprinkler control valve, it may be time to replace the solenoid with a ne.

Replacing the solenoid is an easy sprinkler valve repair. High pressure from a broken solenoid can put a lot of. Shut off the water supply to the sprinkler system.

Remove the valve bonnet assembly and spring. Strip the ends of the wire. Remove the wire nuts attached to the existing solenoid wires and disconnect the two wires.