Turn off the water supply.

How to replace a rainbird sprinkler valve. When the valve is turned on, either by hand or in response to an electronic signal from. Rain bird sprinklers are electrically wired to turn on and off according to the settings on a controller. Do this when the valve is in good shape but is leaking because the internal diaphragm has been damaged.

Typical trench depths range from 6 to 12 inches. Move to a larger shovel to remove the rest of the dirt. How to replace a residential valve diaphragm.

Featuring the most common irrigation system questions and full support information and guides. Clean the threads and apply plumber’s tape to the male connector. Replace with proper fitting thread and length.

Sprinkler system repair information and support from rain bird. Then screw on the head. Pull up the stem and remove the nozzle.

Cut as close as possible to. To run pipe under existing walkways you can drill. Then gently screw your new rain bird sprinkler head onto the riser or fitting and hand tighten.

Most rain bird residential irrigation v. Cut through the pvc irrigation pipes just below the old pvc adapters, using a reciprocating saw, hacksaw, or pvc pipe cutter. Sprinkler valves are critical to your irrigation system’s ability to function efficiently.