Removing vinyl soffits for replacement or repairs requires a helper to hold the ladder.

How to remove vinyl soffit panel. Take a wood chisel and place it at the base of the wood trim. Nail them down to keep them in place until you can attach the vinyl pieces. The outside trim is fascia, it is often the last item installed.

Take the claw hammer and hit the chisel so that the trim gets dislodged from its position. For this project, you will require a few basic tools to get the job done. This inexpensive tool easily unlocks the panel from the one above it, allowing you to remove the fasteners and take it.

To remove vinyl soffit panels, you will need to unmount or unlock both edges of the panel from the retaining channel on both sides. Remove any guttering suspended directly in front of the opening to the aluminum soffit panels. You can go to pretty much any home improvement store that deals with vinyl siding and ask for a zip tool too disconnect the panels.

Vinyl soffits are the portion under the roof eaves between the wall of your home and the edge of the roof. Look where the panel ends in the j channel,find where the panels lock together,take a screw driver,or ice pick at the panel end and''peel'' it away the entire length. For this project, you will require a few basic tools to get the job done.

Secure the buttlock of the upper panel to the top edge of the new panel, using the zip tool. Grab the lip of the buttlock with the tool and pull it over the new. Take off the nails that.

Gather your tools and essentials. It looks like the nailing tab for the vinyl siding is missing nail. Use the fascia cover from.