Depending on the adhesive, a scraping is all you may need to remove it.
How to remove vinyl flooring adhesive from concrete. You should start from the corner of the room to move more smoothly. Tools for removing vinyl flooring from concrete. If you pour a small amount of water on the tiles as you remove them, the liquid will soften the glue and reduce the amount of dust that can.
Keep the room well ventilated and it is best to wear eye protection. How to remover floor adhesive. Next, use a scraper to clean the softened adhesive.
Scrape off as much of the concrete glue as possible. Vinyl flooring can be yellow over time. Cut and scrape the vinyl floor tiles.
The adhesive should at this point come off fairly easily. Apply it according to the directions, and allow enough time for it to sit on the adhesive and work. Pour water on the tiles before removing them.
To get sticker residue off wood or glue from vinyl or carpet, mix the vinegar and water and spread it over the sticky residue on the hardwood with a mop. Apply the gun to the glue and wait for it to soften. Lift up a foot or more of the flooring at once and pull it away from the board if the planks are glue to each other.
Now that the softener has been soaked into the adhesive, your scraper can go to work and start removing the adhesive. Try a hand scraper first, with protective gloves to avoid blisters, but if the job proves. Some people prefer to roll the vinyl strips.