You could also mix the water with vinegar to help break down the mastic chemically.

How to remove tile from concrete. So yes it is possible but almost rare to remove a tile from the concrete floor without breaking. In any case, this process will take a bit of time—somewhere in the range of 30 minutes to an hour. In any case, old but still intact tiles may not be of great value.

Before beginning, put on your safety goggles, rubber gloves, and dust mask or respirator. Drive the chisel in with the hammer, and you’ll remove the tile from a different angle. You can easily remove ceramic tile and thinset from your concrete floors.

You can also use a pry bar to remove. Using rotary tools or a. Some tiles may come up from the floor easily, while you can find others.

Take all the furniture and large items out of the room so you can have unrestricted access to the work area. Use a scraper to remove as much of the adhesive as possible. Hit the chisel with a mallet to lift the tile from the floor.

Take the tiles out of the water once they are soaked and scrape off the adhesive. Begin with a broken tile or between two tiles. Use a scraper, metal scrubber or flat head screwdriver to remove as much of the cement as possible.

It will make the removal of the tiles easier. Lay it at an angle of about 45 degrees and force it down using a sledgehammer or mallet to raise the tile edge and break the bond from the floor. This is because by deciding to.