We have a 2018 337rl reflection.

How to remove rv roller shades. Lay shade on clean flat surface and use a flat screwdriver to pry loose all the endcaps from both both the top and bottom rails. Swing open the clamp on the mounting bracket. I found this link on how to install the roller shades which would help understand how to remove the clip.

How to adjust your roller shadesyou asked us to show you how to adjust your mcd roller shades, so here it is! This adjustment allows you to change the height at which your shade will. If you have any other requests for.

[2] skip this step if your blinds do not have a pulley chain. This fabric is suitable for indoor and outdoor use, so it’s an ideal choice for rv shade fabric. Look for the pin to one side of the blind’s top bar.

It also boasts an incredible 92.5% shade factor for optimal temperature control inside your rv. If your window coverings include them, you’ll need to locate the chain safety clip. Remove endcaps from top and bottom rail.

There are a few different ways that you can remove rv shades, depending on the type of shade that you have. On our roller shades there are spring loaded push taps on the bottom of the brackets that the shades mount to. The rv mechanic can walk you through removing the the roller.

Push up on the tab and the shade. Insert the tip of a screwdriver into the head of the screw and turn it to the left to loosen and remove the screw. Remove the blind from the brackets.