If the ceramic tile is bonded well to the concrete, removing it will take some effort.

How to remove floor tile from concrete. You will need a ceramic tile. Lay it at an angle of about 45 degrees and force it down using a sledgehammer or mallet to raise the tile edge and break the bond from the floor. You can also use a pry bar to remove.

It will make the removal of the tiles easier. As was mentioned before, you can use an electric tool or a chisel and a hand maul. If you're wanting to level the floor or lay new flooring directly on to the concret.

Once all the rows are done, get rid of adhesive as well. Pour water on the tiles before removing them. Masonry chisel — 1 or ¾ inch.

You could also mix the water with vinegar to help break down the mastic chemically. Drive the chisel in with the hammer, and you’ll remove the tile from a different angle. The basic tools and supplies you’ll need to remove tile and tile adhesive from a concrete floor include:

Removing the tile and grout. Ceramic tile is much harder than cement and can tolerate the cleaning methods needed to break down and remove the cement. These can be found at a nearby hardware store.

Wet the entire area with the suds and let it sit for a few minutes. In any case, this process will take a bit of time—somewhere in the range of 30 minutes to an hour. If you encounter stubborn tiles, hit the tile with a chisel until it breaks.