You can use any common kitchen oils such as coconut oil or vegetable oil for this step.
How to remove command strip residue from wall. Is there a way to remove a command strip? After removing the adhesive, make sure to clean the area with soap and water. See how easy it is to not tear the wall paint when you properly remove a command strip.
Sometimes the sticky part may still be left on. Start with wiping the wall with rubbing alcohol to remove the grease, dust and grime. Pull the floss taut between your hands and slide it beneath the command strip foam from the top, sawing gently back and forth as you work the floss downward, cutting through the command.
If the adhesive is still clinging to the wall, try using a hairdryer to heat it up and make it easier to remove. To apply clear strips work best on smooth surfaces. To get rid of the smeared petroleum jelly, apply few drops of dish soap.
Wiggle it down behind until it reaches the bottom. Don't use household cleaners like wipes or sprays because they leave behind a. How do you attach the command strip?
If those two methods don’t work, you can try using a solvent like a nail polish. A piece of floss and a hairdryer will do the trick first, warm up the adhesive with a hairdryer. 30 seconds or so seems to be about right.
Rub the bits with petroleum jelly. Your hook will come right off! Doing so will help get.